QSI  Home Page
   



QSI 500/600 Series WSG
w/ Integrated Guider Port
  Home > 500 Series > Integrated Guider Port


QSI 583wsg
w/ Integrated Guider Port

  • Integrated Guider Port
  • Guide using light from in front of the filters
  • Low noise, wide dynamic range
  • Up to 45C CCD cooling
  • Built-in mechanical shutter
  • Internal 5 or 8-position color filter wheel

Flexible Guide Camera Options

The Integrated Guider Port (IGP) built into 500 Series WSG models is designed to support any camera with 12.5mm of back focus or less that can be attached using C-mount or T-mount threads. Many cameras are designed with 12.5mm of back focus to be compatible with CS-mount lenses which use the same thread as C-mount (1" x 32tpi) but with 12.5mm of back focus instead of 17.5mm for C-mount.

Click here for a list of guide cameras
known to be compatible with the wsg >>

Easy, Rigid Guide Camera Focusing

The guide camera attaches to the WSG using a C-mount or T-mount threaded adapter (specified at time of order). The threaded adapter sits on top of the focus ring and allows the guide camera to be rotated to any position. The focus ring threads onto the focus base to allow 3mm of travel when focusing the guide camera. Once focus is achieved, the focus ring is locked with a set screw. The guide camera can still be rotated manually if desired without changing the focus. The end result is a rigid, easily focused guide camera that will not move or flex while your mount tracks the apparent motion of the night sky.

QSi 500 wsg Adapters

Upgrade Your Existing 500/600 Series Camera

Upgrade your existing QSI 500/600 Series camera with an Integrated Guide Port. The WSG upgrade replaces your existing camera cover.
View details on the Accessory page>>

 

All QSI 500/600 Series cameras offer high sensitivity, exceptionally low noise, and precisely regulated cooling.


QSI 500/600 Series Cameras
with Integrated Guider Port

QSI WSG models are an innovative new addition to the QSI 500/600 Series family of cooled CCD cameras. The WSG has an internal mechanical shutter and filter wheel like the 500 Series "ws" models, plus it adds an Integrated Guider Port. This allows guiding using the light from your main telescope while picking off the light from the guide star in front of the filters. The WSG option is available on all 500/600 Series models.

Selecting the best guiding solution has always required a compromise. The Integrated Guider Port (IGP) of the WSG solves many of the problems associated with existing guiding solutions.

The Right Guiding Solution

Guiding with a separate guide scope provides the most flexibility, but differential flexure can be an issue, especially with long focal length scopes. With an internal guide chip, you're forced to guide with light through your filters and you can't guide at all while the shutter is closed or an image is being downloaded. This is especially problematic for narrowband imagers. To get around those issues, you could add an external off-axis guider, but a traditional OAG can add an inch or more of back focus plus more weight and two new mounting surfaces that need to be held rigidly.

QSI 500 Series wsg

Guide with Light From
in Front of the Filter Wheel


The QSI 500 Series WSG models solve the problems with other guiding solutions by integrating a precision off-axis guider directly into the camera body with the pick-off prism positioned in front of the integrated color filter wheel – right where it belongs.

Never Struggle With Finding a Guide Star

One of the main challenges when using a camera with an internal guide chip is to find a star bright enough to guide by within the limited field of view of the internal guide sensor. When shooting through red, green or blue filters, ⅔ of the available light is blocked by the filter and not transmitted to the internal guider chip, guaranteeing lower signal-to-noise stars for guiding. This problem is compounded with narrowband filters where as little as 1% of the total light from a star reaches the guide chip. By positioning the pick-off prism in front of the filters, you always have all the star's light available for guiding.

WSG Supports Fast Optical Systems

By integrating the Guider Port into the camera, we're able to position the pick-off prism very close to the internal filter wheel adding minimal backfocus and eliminating any possibility of flexure or rotation compared to a traditional OAG. The large ½" square pick-off prism is optimally positioned close to the internal filter wheel, supporting the use of guide cameras with large sensors, while preventing any vignetting of the main sensor even with very fast optical systems.


QSI 500/600 Series WSG Specifications

The following standard items are included
with QSI 500/600 Series WSG model cameras:


  • T-mount Camera Adapter*
  • T-mount Adapter Cover*
  • T-mount to 2" Nosepiece
  • T-mount Guide Camera Focus Adapter *
  • 12VDC / 90-240VAC power supply
  • 10' USB 2.0 Interface Cable
  • 10' Standard Guider Cable
  • QSI Software Installation CDROM
  • Drivers for MaxIm DL/CCD and CCDSoft
  • ActiveX Developer's Toolkit
  • Custom Fit Pelican Storage Case

View all Accessories >>
* Other options are available at
the time of purchase. See Configure Camera page...
Feature QSI 600 Series wsg(-8)
Camera Body Configuration Integrated Guider Port
Enclosure
Dimensions 5-pos wsg,    W4.45” x H5.0” x D3.08”
8-pos wsg-8, W5.86” x H6.1” x D3.08”
(add 0.225" for T-Mount, 0.35" for 2.156" thread mount)
Weight, without Nosepiece 5-pos, 46 oz.  /  1300g
8-pos, 56 oz.  /  1600g
Optical Back Focus
(without Filters in path)
2.10" (53.3mm) with 2.156" thread adapter (optional)
1.98" (50.2mm) with T mounting adapter
1.75" (44.5mm) w/o mounting adapter
Guide Camera Attachment T-mount (42mm x 0.75mm) w/built-in manual rotator
C-mount (1" x 32 tpi) w/built-in manual rotator
Guide Camera Optical Focal Depth 12.5mm +/- 1.5mm (0.49" +/- 0.06")
Face Plate Adapter Standard adapter - T-mount (2.156" x 24tpi adapter available)
Nosepiece Standard T-mount to 2" nosepiece.
Optional 2" nosepiece for 2.156 adapter
See description pages for specific camera models for complete specifications.
Specifications are subject to change.

 Shopping Help
 Privacy Policy
 Terms of Use
 Contact QSI
Copyright 2006-2008 Quantum Scientific Imaging, Inc.   All Rights Reserved.